2
EN
digital true RMS multimeter BE52
Table of contents
Notes regarding the instructions ......................................... 2
Safety ..................................................................................... 2
Information about the device................................................ 5
Transport and storage........................................................... 8
Operation ............................................................................... 8
MultiMeasure Mobile app.................................................... 13
Maintenance and repair ...................................................... 17
Errors and faults.................................................................. 18
Disposal ............................................................................... 18
Declaration of conformity ................................................... 18
Notes regarding the instructions
Symbols
Warning of electrical voltage
This symbol indicates dangers to the life and health of
persons due to electrical voltage.
Warning
This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.
Caution
This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.
Note
This signal word indicates important information (e.g.
material damage), but does not indicate hazards.
Info
Information marked with this symbol helps you to carry
out your tasks quickly and safely.
Follow the manual
Information marked with this symbol indicates that the
instructions must be observed.
You can download the current version of the instructions and
the EU declaration of conformity via the following link:
BE52
https://hub.trotec.com/?id=46448
Safety
Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use.
Warning
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
•
The device is supplied with warning signs. Prior to initial
start-up, make sure to paste the corresponding warning
signs in your local language, if available, over the ones
present at the rear of the device as described in the
Operation chapter. Otherwise, choose labels in a language
you know.
•
Do not use the device in potentially explosive rooms or
areas and do not install it there.
•
Do not use the device in aggressive atmosphere.
•
Protect the device from permanent direct sunlight.
•
Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
•
Do not open the device.
