Data logger operating manual
11
EN
11. Status codes
Technical data
external temperature sensor TS 910
Temperature
Operating principle
NTC
Measuring range
-20 °C to +80 °C
Accuracy
0.2 °C (0…40 °C), otherwise, 0.8 °C
Screen resolution
0.1 °C (0…40 °C), otherwise, 0.2 °C
Permissible operating
ambient conditions
Air temperature
-20 °C to +50 °C
Relative humidity
0 to 100 % RH
Configuration
and dimensions
Dimensions
Cable length 6 m, sensor length 20 mm, sensor diameter 5 mm, weight 85 g
Type of protection
IP65
Connection
3.5 mm plug socket
In the event of a sensor error, the following codes may appear on one of the three LCD rows instead of the measured value
E 2C
.........Initialisation error at the sensor
E 27
.........Faulty calibration data
E 36
.........Channel disabled (e.g. channel configured in the LCD,
but sensor logged off or removed)
E 50
.........Value to be displayed too large to fit on display
E 51
.........Value to be displayed too small to fit on display
E 52
.........Channel value in the saturation (upper limit)
E 53
.........Channel value in the saturation (lower limit)
E 54
.........Data error. Received data are not plausible
E 55
.........Measurement not possible of sensor not reachable
