Operating manual – Infrared camera
B -
12
2. Press Up
▲
and Down
▼
arrow on the omni
selector to select [Ma-
nual adj.], then press
MENU/ENTER key.
3. Setting measurement range.
• Press the Up
▲
or
Down
▼
arrow on
the omni selector to
select range.
• Press the Left or
Right
arrow on
the omni selector to set the measurement range.
• This option is unavailable when the image is frozen.
4. Selecting the measuring range when using optional
lenses
• Having
selected
the box for the
measuring range,
press the keys
▲
UP/DOWN
▼
si-
multaneously
to
set the tempera-
ture range for the lens in use.
Type
Zero
A
B
C
D
E
Lens
20°
12,8°
38°
3,8°
6,4°
9°
5. Having completed this step, press the MENU/ENTER
key to close the window.
Freezing / Activating an image
You can activate / freeze a thermal image by pres-
sing the S key on the selector.
1. Check that the IR came-
ra is in null mode.
2. Press the S key, then
the image is freezing.
3. Press the S key again, then the image is active.
Setting analysis parameters
1. Press the MENU/ENTER key.
2. Press Up and Down
arrow on the omni se-
lector to select [Ana-
ysis],then press the
MENU/ENTER key.
3.
Setting the analysis
parameters
• Press the arrow UP
▲
/DOWN
▼
on the
selector to get to the
menu item “Object
Set-up”.
• Press either the
▲
UP / DOWN
▼
or
LEFT /
RIGHT key on the omni-selector to set the values.
4.
After this operation,
press the MENU/
ENTER key to save
changes, or press the
C key close menu
window without sa-
ving.
