TR
T-
K
A
-E
S
020/ES
040-
TC
-0
0
1
-E
N
B - 2
Quick start guide - Thermal imaging camera EC020 / EC040
EN
Switching on the laser
1. Point the camera at the measuring area and hold down the
laser button.
– The laser switches off as soon as you release the button.
Freezing the image
1. Press the "S" button for a short time.
– The image is frozen.
2. Press the "S" button again to release the frozen image.
Saving the image
1. Press the "S" button for approx. 2 seconds.
– The image is saved on the SD card.
Measuring points
1. Press the
button.
2. Choose between the measuring points with the
button.
3. Press the "C" button to close the menu.
– Depending on the selection, the measuring point may be moved by the
arrow buttons.
Switching off
Recharging the battery
Software
Download the IR-Report Basic software from the following link:
http://software.trotec.com
Follow the installation instructions. For information about further editing of the
thermograms, read the operating manual and the help text of the
corresponding IR-Report software.
Operating manual
Download the operating manual from the following link:
http://www.trotec.com
3 sec
