EN
6
Operating manual – 3-in-1 multi-function sander PMSS 10-200
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
Caution
Keep a sufficient distance from heat sources.
Notice
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Behaviour in the event of an emergency
1. Switch the device off.
2. In an emergency, disconnect the device from the mains
feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.
3. Do not reconnect a defective device to the mains.
Information about the device
Device description
The device
PMSS 10-200
is a 3-in-1 multi-function sander for
dry sanding.
The device is equipped with a 200 W motor.
The three sanding plates delta sander, random orbital sander
and orbital sander are suitable for sanding wooden surfaces,
plastic, metal, spackle and paints in corners, along edges and
on larger surfaces.
For material-compatible working, the nominal oscillation rate
can be set steplessly within a range of 14,000 to 24,000 opm at
the setting wheel.
The device is fitted with a switch for continuous operation
enabling convenient and fatigue-free working.
The tool-free clamping system/Velcro system permits a simple
exchange of sanding sheets.
A clean working environment can be accomplished by use of
the dust collector with integrated filter and the adapter for
external dust extraction.
