B -
13
Operating manual – Infrared camera
About the analysis parameters:
Emiss
Different objects have different emissivity levels. Use differ-
ent emissivity levels to measure different object.
Distance
Different objects have different distances to the IR came-
ra. Use different distances to measure different objects.
Amb Temp
Input ambient temperature.
Humidity
Input ambient humidity.
The more precise the information for the object in
question, the more accurate the measurement result.
Setting analysis settings
1. Press the MENU/ENTER key.
2. Press the
Up and
Down
arrow on the
omni selector to select
the [Setup] menu, then
press the MENU /
ENTER key.
3. Press
Up and Down
arrow on the omni
selector to select [Ana-
lysis], then press the
MENU/ENTER key.
4. Setting analysis para-
meter.
• Press the Up or
Down arrow on
the omni selector to
select a new field.
• Press
3
Left, Right
4
arrow on the selector
to set the values.
5. After this operation, press the MENU/ENTER key to
save changes, or press the C key to close the menu
window without saving.
About the analysis settings:
Capture Spot (max- / min spot)
Sets spot 4 to automatically track the highest / lowest
spot on the screen.
- Maximum
Sets the spot 4 to track the warmest spot on the screen.
- Minimum
Sets the spot 4 to track the coldest spot on the screen.
Alert
An alarm tone sounds when the camera has been
switched on. It sounds at „Maximum“ when the set
temperature has been reached or exceeded and at
„Minimum“ when the alarm temperature has been
reached or when it has fallen below the prescribed
value. The value on question is determined by spot 4.
Alert temp
Sets the temperature limit of “Alert”.
Correct temp
Corrects the measured temperature value of the camera
to ensure measurement accuracy under special cir-
cumstances.
warnInG: Zero point displacement of the cali-
bration curve in the background.
Isotherm width
Sets the width of isothermal interval. The width can
be adjusted from 0.1 to the upper limit of the ma-
ximum temperature measurement range under this
condition.
Isotherm color
Sets the color of the isotherm interval. Transparent,
Green, Black, and White are available.
3
3
3
3
3
3
