Operating manual – Infrared camera
B -
16
Setting Definable Trigger
You can set the definable trigger different function
like saving image, auto adjust, Laser and turning on
illuminator.
1. Press the MENU/EN-
TER key, then press
Up and Down
ar-
row
on
the
omni selector to
select the [Setup]
menu, and then press
the MENU / ENTER key.
2. Press the Up and
Down
arrow on the
omni selector to select
the [Others] menu, and
then press the MENU/
ENTER key.
3 . Press
Up and Down
on the selector to select
the [Trigger Button] menu, the Press the
3
Left,
Right
4
arrow on the omni selector to select the
function you need.
About the function of the definable trigger
None:
No function selected.
Save:
Saves the image.
Auto adjust:
Corresonds to A key.
Laser on:
You can activate the laser pointer by
pressing the trigger.
Lightingon:
You can activte/ deactivate the illuminator by
pressing the trigger.
06. playBack and delete
Opening Images
You can view and analyze the recorded images on the
LCD monitor.
1. Press the MENU/ENTER key.
2. Press the Up and Down arrow on the omni selec-
tor to select the [File] menu.
3. Press
Up and Down
arrow on the omni
selector to select
[Open], the press
the Menu / Enter key.
4. Select an image then
press MENU / ENTER
key to open it.
How to select an image
1. After selecting [Open] or [Delete] option under [File]
menu, a message shown as below will appear in the
lower left of the screen.
2. If the image you wish to open or delete is not in the
current folder, press the [
Up] arrow on the omni
selector until the following message appear.
3. Press the C key, then the S key to activate the image.
Select the name of the current folder
1. Press the MENU/ENTER key.
.. <DIR>
Enter or cancel
<DIR> GZSAT001
Open SAT00001.SAT
The Folder name
The Image name
3
3
3
3
3
3
3
3
3
3
3
