background image

EN

2

Operating manual – radiant heater IR 1500 S

Safety

Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use!

Do not use the device in potentially explosive rooms.

Do not use the device in aggressive atmosphere.

Let the device dry out after a wet clean. Do not operate 
it when wet.

Do not use the device with wet or damp hands.

Do not expose the device to directly squirting water.

Never insert any objects or limbs into the device.

Do not cover or transport the device during operation.

This appliance is not a toy! Keep away from children and
animals. Do not leave the device unattended during
operation.

Check accessories and connection parts for possible
damage prior to every use of the device. Do not use any
defective devices or device parts.

Ensure that all electric cables outside of the device are
protected from damage (e.g. caused by animals). Never
use the device if electric cables or the power connection
are damaged!

The electrical connection must correspond to the
specifications in chapter Technical data.

Insert the mains plug into a properly secured mains
socket.

Observe the device's power input, cable length and
intended use when selecting extensions to the power
cable. Completely unroll extension cables. Avoid electrical
overload.

Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.

Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.

Do not under any circumstances use the device 
if you detect damages on the mains plug or power cable.
Defective power cables pose a serious health risk.

Observe the storage and operating conditions (see chapter
Technical data).

Do not transport the device during operation.

Allow the device to cool down before transport and / or
maintenance work.

Intended use

Only use the device 

IR 1500 S

 for heating surfaces in interior

spaces or in roofed outdoor areas protected from weather
effects.
Intended use comprises:

Heating surfaces

– in living spaces,
– in storage facilities,
– in salesrooms,
– in construction areas,
– in containers,
– in bathrooms,
– on changing tables,
– in roofed outdoor areas (e.g. covered terraces).

Improper use

The device is not intended for industrial use.

Do not place any objects, e.g. clothing, on the device.

The device may not be used for heating vehicles.

The device may not be used as a heating device for
babies / children or animals.

The device may not be installed inside a shower or directly
above a bathtub.

The device may not be used near swimming pools.

The device may not be used in the immediate vicinity 
of sinks, bathtubs or other water containers.

Do not expose the device to moisture or weather effects
(rain, sunlight).

The device must not be mounted to the ceiling.

Any operation other than as described in this manual is
prohibited. Non-observance renders all claims for liability
and guarantee null and void.

Any unauthorised changes, modifications or alterations 
to the device are forbidden.

Personnel qualifications

People who use this device must:

be aware of the dangers that occur when working with
electric devices in damp areas.

have read and understood the operating manual, especially
the Safety chapter.

Summary of Contents for IR 1500 S













Reviews: