3
EN
Operating manual – radiant heater IR 2500 S
Symbols on the device
Symbols
Meaning
This symbol located on the device indicates that it
is prohibited to place objects (such as towels,
clothes etc.) above or directly in front of the
device.
In order to avoid overheating and fire hazards, the
heater must not be covered.
Residual risks
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning of hot surface
Some parts of this product can become very hot and
cause burns. Particular attention has to be given where
children and vulnerable people are present!
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
Risk of injury due to infrared radiation!
Do not stay in the device's immediate vicinity for too
long. Do not look directly into the device for too long.
Observe the minimum distances.
Warning
Improper installation or mounting entails a risk of fire.
Warning
In order to avoid overheating and fire hazards, the
heater must not be covered.
Warning
Coarse dirt particles on the heating rods can cause the
device to overheat. Fire hazard!
Remove coarse dirt particles from the heating rods
according to the Maintenance chapter before switching
on the device.
Behaviour in the event of an emergency
1. Switch the device off.
2. In an emergency, disconnect the device from the mains
feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.
3. Do not reconnect a defective device to the mains.
Information about the device
Device description
The device
IR 2500 S
is used to quickly generate instant heat.
The device is based on the functional principle of heat
generation by infrared radiation. Persons or objects are heated
directly.
The temperature can be infinitely adjusted via an integrated
thermostat.
•
suitable for the application in roofed outdoor areas
•
splash-proof IP34
•
suitable for mounting on walls and ceilings or on the
telescopic tripod
•
adjustable angle
•
no dust circulation (suitable for allergy sufferers)
Device depiction
2
3
4
1
No.
Designation
1
On/off rotary switch (stepless thermostat)
2
Bracket for wall/ceiling mounting
3
Grille
4
Heating rod
