8
EN
radiant heater IRS 2010 E
Installation
When installing the device, observe the minimum distances
from walls and other objects as described in the Technical data
chapter.
A
B
C
C
D
•
Set the device up in an upright and stable position.
•
Do not position the device directly below a wall socket.
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that there are no curtains or similar objects in
the immediate vicinity.
Prior to initial start-up, insert batteries in the remote control.
Connecting the power cable
•
Insert the mains plug into a properly fused mains socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
Operation
Operating elements
9
10
11
1
No.
Designation
Meaning
1
Segment display
Heating level indication:
L1
= heating capacity 1000 W
L2
= heating capacity 2000 W
Indication of the number of hours
during timer programming
9
Power
button
Switching the device on or off
10
Timer
button
Timer function: Automatic switch-off
in increments of 1 hour up to
24 hours
11
Heating level
button
Changing the heating level