EN
9
radiant heater IRS 2010 E
Remote control
All settings of the device can also be made using the remote
control included in the scope of delivery.
11
9
10
12
13
No.
Designation
Meaning
9
Power
button
Switching the device on or off
10
Timer button
Activate automatic switch-off
timer function in increments of 1 h
up to 24 h
11
Heating level button Setting the heating level
12
UP button
Heating level/timer function
Increases the value.
13
DOWN button
Heating level/timer function
Reduces the value.
Warning of hot surface
The grille (
3
) heats up during operation and can be
warm after switch-off.
Do not touch the grille (
3
) during operation, wait until it
has cooled down after switch-off.
Switching the device on
Once you have completely installed the device as described in
the chapter Assembly and start-up, you can switch it on.
1. Set the mains switch (
5
) to position
I
.
ð
The device is now in standby mode.
2. Press the
on/off
(
9
) button to switch the device on.
3. Press the
heating level
button (
11
) to select the desired
heating level (L1 – L2).
ð
The segment display (
1
) indicates the set heating level.
Setting the timer
The timer allows you to program an automatic switch-off time in
increments of 1 hour up to 24 hours at any heating level.
Automatic switch-off
ü
The device is switched on.
1. Press the timer button (
10
) for several times to adjust the
number of hours of the timer.
ð
The segment display (
1
) indicates the set number of
hours.
ð
The timer has been programmed and the device will
switch off after the predefined time.
Notes regarding automatic switch-off:
•
Manually switching the device off disables the automatic
switch-off function.
•
If you select 00 hours, the timer will be switched off.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
•
Switch the device off by setting the mains switch (
5
) to
position
0
.
•
Allow the device to cool down completely.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Clean the device according to the Maintenance chapter.
•
Store the device according to the Transport and storage
chapter.