4
Operating Manual – Portable Air Conditioner PAC 2000 E
EN
Transport
To make the device easier to transport, it is fitted with wheel.
Before transporting the device, proceed as follows:
1. Switch off the device.
2. Remove the mains plug from the mains socket. Do not use
the power cable to drag the device!
3. Only wheel the device on a level and smooth surface.
Storage
Drain any remaining condensate (see chapter Maintenance).
When the device is not being used, observe the following storage
conditions:
• dry,
• protected from dust and direct sunlight,
• with a plastic cover to protect it from invasive dust, if
necessary.
• Remove the batteries from the remote control.
Installation of the device
When positioning the device, observe the minimum distance from
walls or other objects as described in the chapter Technical data.
• Put the device up in a level, upright and stable position.
• Do not create tripping hazards when laying the power cable.
• Keep air inlets and outlets (2, 4, 5 and 8) as well as the
exhaust air hose connection (7) free.
• Prior to initial start-up, insert the batteries (2 x type AAA) in
the remote control:
Inserting the air filters
• Insert the two air filters before first use:
Connecting the exhaust air hose
1. Connect the individual hose components until their tight fit is
ensured.
2. Put the adapter (13) from above onto the exhaust air
connection (7) at the device.
– The adapter (13) snaps into place.
Transport and storage
Set-up and installation
30 cm
30 cm
30 cm
Start-up
AUTO
T-ON T-OFF
COOL
DRY
FAN
HEAT
SWING
SLEEP
LOCK
SPEED
MODE
FAN
SWING
ON/OFF
SLEEP
TIMER
°F
OPER
AUTO
°C
13
7
Summary of Contents for pac 2000 e
Page 1: ...PAC 2000 E OPERATING MANUAL PORTABLE AIR CONDITIONER EN TRT BA PAC2000E TC 001 EN ...
Page 2: ......
Page 15: ......
