14
EN
air cooler PAE 10
7. Close the water tank (5) again.
5
Cleaning the water tank
The water tank should be cleaned every two weeks.
Warning of electrical voltage
Make sure that the power cable has been removed
from the water tank before filling it.
There is a risk of electric shock!
Note
The water tank cannot be removed.
Do not attempt to remove the water tank for otherwise
the device could be damaged.
1. Open the water tank (5).
5
2. Thoroughly rinse the water tank.
3. Clean the tank using a mild cleaning agent (no detergent!).
4. Remove all calcium deposits in the water tank.
5. Dry the inside of the water tank with a lint-free cloth.
6. Fill the water tank (5) with fresh drinking water if you want
to continue operation (see chapter Refilling water).
7. Close the water tank (5) again.
5
Cleaning the air filter
The air filter has to be cleaned as soon as it is dirty. This is
brought to light e.g. by a reduced capacity (see chapter Errors
and faults).
Warning
Ensure that the air filter is not worn or damaged. The
corners and edges of the air filter must not be
deformed or rounded. Before reinserting the air filter,
make sure that it is undamaged and dry!
1. Remove the air filter from the device.
