14
EN
cordless belt sander PBSS 10-20V
Adjusting the belt run
Note
Make sure that the abrasive belt does not grind into the
housing.
Regular check the belt run for its proper positioning
and, if necessary, adjust it by means of the adjusting
screw.
If the belt run is not centred after switch-on, the belt run may
have to be adjusted manually.
Use tools suitable for the intended task.
Please proceed as follows:
1. Keep turning the adjusting screw (
15
) located at the front
roller until the abrasive belt (
10
) runs centrally.
10
15
ð
If the belt run is still not centred after the adjustment, the
abrasive belt (
10
) needs to be replaced.
Inserting the dust bag
Warning of explosive substances
Wood dust can self-ignite in case of flying sparks. Do
not use the dust extraction system or the dust bag
when grinding metals!
Wood dust can intermix with varnish residues or other
chemical substances.
Risk of fire and explosion!
Avoid overheating of the workpiece and the device.
Empty the dust bag or the vacuum cleaner's dust
collection bag at regular intervals.
Wear a protective mask
Wear an appropriate protective mask when working
with the device.
Info
If you want to use a dust bag for smaller scale work,
make sure to empty it on a regular basis so that a
sufficient amount of dust can be taken in.
1. Place the adapter for dust extraction (
11
) on the dust
bag (
9
).
2. Insert the dust bag (
9
) firmly into the dust extraction
connection (
5
).
3. Empty the dust bag (
9
) in due time to maintain an optimum
absorption of dust.
5
9
11
