EN
11
compressor PCPS 10-1100
Operation
Tips and notes on handling the compressor
General information:
•
Keep the venting slots clear to prevent the motor from
overheating.
•
The device is not suitable for continuous operation. Over a
period of 10 minutes, do not use the device for more than
1.5 minutes in continuous operation. Allow the device to
cool down for the remaining time.
•
Only use intact, flawless valve adapters.
•
Do not use the device at temperatures below +5 °C, since
the motor becomes sluggish and can be difficult or
impossible to start up at these temperatures.
Switching on the compressor
Info
If you only want to check or reduce the pressure e.g. in
a car tyre, it is not necessary to switch the device on.
1. Connect the device to the mains.
2. Switch the device on by setting the on/off switch (2) to
position
I
.
2
Switching off the compressor
1. Switch the device off by setting the on/off switch (2) to
position
0
.
2
2. Make sure that the system is depressurized by pulling the
trigger (14) of the compressed-air gun (12) after
switch-off.
3. Hold onto the mains plug while pulling the power cable out
of the mains socket.
Pressure gauge indication
1
2
3
4
5
6
8
9
10
11
12
0
7
20
40
60
80
100
140
160
170
26
28
27
No. Designation
Meaning
26 Indicator scale for psi
Measures the pressure in psi.
27 Indicator scale for bar
Measures the pressure in bar.
28 Indicator needle
Indicates the current pressure
value in psi and bar.
