20
EN
cordless portable circular saw PCSS 10-20V
Switching the device on and off
Wear your personal protective equipment when working with
the device.
1. Check whether the fixed saw blade is suitable for the
intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Hold onto the power tool with both hands.
4. Position the device by first placing the front edge of the
base plate on the workpiece.
5. Align the device with the rip fence or the cutting line.
6. Press the start lock (
25
) to be able to actuate the on/off
switch (
24
).
I.
II.
25
24
7. Press the on/off switch (
24
) and hold it during operation.
8. Wait a moment until the motor has reached full speed.
9. Move the device closer to the workpiece.
10. Move the device along the cutting line with a slight forward
motion.
ð
The lower guard opens automatically when the device is
pushed forward. Do
not
open the lower guard manually.
Risk of injury!
11. After completing the sawing operation, let go of the on/off
switch (
24
) to stop the device.
24
