B -
17
Infrared Camera – Operating Manual
EN
4. The name of the sa-
ved image will be dis-
played on the screen.
Voice annotations (optional)
1. Install the Bluetooth headset (optional).
2. To freeze an image
press the MENU/
ENTER key.
3. Press the
s
up/
down
t
arrow on
the omni selector to
select the [File] menu.
4. Press
s
up/down
t
arrow on the
omni selector to select
[VoiceREC.], then press
the MENU/ENTER key.
The message [Voice
Recording] will appear
on the LCD monitor.
5. Speak into the headset microphone. To stop recor-
ding press the C key.
6. Save the image.
Trigger Settings
The trigger can be set to perform a variety of different
functions: it can be used to store images or to switch
the laser or the lamp on or off.
1. Press the MENU/EN-
TER key and then the
arrow
s
up / down
t
on the omni selector
to get to the menu item
[Lighter on] and press
the MENU/ENTER key.
2. Press the up and down arrow on the omni selec-
tor to select menu item [Others] and then press
the MENU/ENTER key.
Trigger Information
Save:
Press the trigger to save an image.
Laser on
: Press the trigger to activate the laser.
Lamp on
: Press the trigger to turn on the integrated lamp.
06. reCOrdInG and deLetInG
Opening Images
You can view and analyse the recorded images on the
LCD monitor.
1. Press the MENU/ENTER key.
2. Press the
s
up and
down
t
arrow on the
omni selector to select
the [File] menu.
3. Press
s
up and down
t
arrow on the
omni selector to select
[File], then press the
MENU/ENTER key.
4. Select an image, then
press MENU/ENTER key
to open the image.
You can choose to ana-
lyse an image or add
your own voice anno-
tations after the image
has been opened.
Selecting Images
1. When you have selected [Open] or [Delete] in the [File]
menu, a message will appear in the lowerleft-hand
corner of the screen as shown below.
2. If the image you wish to open or delete is not in the
current folder, press the [UP] arrow on the omni selector
until the following message appears.
<DIR> GZSAT001
Open SAT00001.SA
