background image

 

EN

 

Infrared Camera – Operating Manual

 

B -

 

6

Powering On or Off

The power indicator shows that the camera is on and 
has suffi cient battery power.
1.  Hold  the  camera  as 
    shown, place your thumb 
    above the keypad and rest 
    your  forefi nger  gently  on 
    the trigger. 

2.  Press and hold the power 
    switch for 3 seconds. The 
    power  indicator  lights  up 
    green.

3.  Shortly afterwards, a start-
    up image appears on the 
    screen.

4.  To power off press the power key and hold for 3 se-
    conds. The power indicator goes off.

Information on the LCD Monitor

The LCD monitor has a fi eld of vision of 100%.
The following view provides you with information on 
individual data:

Information regarding the operating indicator

The  operating  indicator  shows  which  operating  status 
the camera is in.

Menu . . . . . . . . . . . . . . . . . . . . .shows the menu mode

Zero . . . . . . . . . . . . . . . . . . . . . . . shows the non-menu 
                                            No analysis tools is selected

1 - 4 . . . . . . . . . . . . . . . shows the current analysis tool 
                                            is sport 1 or spot 2 or spot 3

Cap  . . . . . . . . . . . . . . . .  shows that the tool has been 
                                      selected  to  automatically  track
                                    the measuring point (auto tracking)

Isot . . . . . . . . . . . . . . . . . . . . shows the current analysis 
                                                     tool is isotherm analysis

E. . . . . . . . . . . . . . . . . . . . . . . . . . . . .  current emissivity

      . . . . . . . . . . . . . . . . . . . . . . . . . . . . SD card inserted

. . . . . . . . . . . . . . . Bluetooth headset has been installed

you  will  need  to  enter  the  zero  mode 

before  you  start  measuring  with  your 

camera. In order to do so press the Can-

cel key repeatedly until the required zero 

mode appears in the display.

m

Reading

Status of the camera

Live/
Freeze

Operating indicator

Current Emissivity

Battery Status

time

Upper limit of 
colour scale

Lower limit of 
colour scale 

Colour scale

NULL E=1.00

ZERO

Summary of Contents for POWERSHRED





























Reviews: