EN
5
cordless planer PPLS 10-20V
•
Do not under any circumstances use the power tool if
you detect damages on the mains plug or power cable.
If the supply cord is damaged, it must be replaced by the
manufacturer, his service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk!
•
Keep your hands away from the cutting head. Do not
reach into the area between the power tool and the
workpiece. Do not rest your hands near the power tool.
Risk of injury upon contact with the blade.
•
Do not treat the surface to be processed with liquids
containing solvents.
Toxic fumes may be produced
during scraping owing to the heat-up of the materials.
•
Use appropriate detection equipment to track down
concealed supply lines or consult the local utility
companies.
Contact with electrical lines may result in fire
and electric shock. Damaging a gas line may lead to an
explosion. Penetrating a water line causes property
damage and may cause an electric shock.
•
Use sharp blades only.
Intended use
Only use the device
PPLS 10-20V
:
•
for planing wood materials, e.g. beams and boards, while
keeping base plate contact,
•
for chamfering edges of wood materials while keeping
base plate contact,
•
for rebating wood materials while keeping base plate
contact
whilst adhering to the technical data.
We recommend using the power tool with original Trotec
accessories.
Foreseeable misuse
The device
PPLS 10-20V
is not suitable for planing metal.
The device is not intended for processing damp wood.
Any other use than the one described in the chapter "Intended
use" is regarded as reasonably foreseeable misuse.
Personnel qualifications
People who use this device must:
•
have read and understood the instructions, especially the
Safety chapter.
Safety signs and labels on the battery
Note
Do not remove any safety signs, stickers or labels from
the device. Keep all safety signs, stickers and labels in
legible condition.
The following safety signs and labels are attached to the
battery:
Warning of explosion risk!
These symbols indicate the following:
Do not expose the battery pack or tool to fire or
excessive temperature! Do not let the battery come into
contact with water or fire! Avoid direct sunlight and
moisture. There is a risk of explosion!
Never charge the battery at ambient temperatures
below 10 °C or above 40 °C. Charging improperly or at
temperatures outsides the specified range may damage
the battery and increase the risk of fire.
Observe the correct disposal of the battery!
This symbol indicates the following:
Ensure that the battery is disposed of correctly and
never dispose of it in waste water or public waters.
The battery contains irritating, caustic and toxic
substances that pose significant risks to people and the
environment.
Personal protective equipment
Wear hearing protection.
Excessive noise can lead to hearing loss.
Wear eye protection.
With it you protect your eyes from splintering, falling
and flying pieces which could cause injuries.
Wear a protective mask.
It saves you from inhaling harmful dusts generated
when processing workpieces.
Wear protective gloves.
They protect your hands from burns, crushing injuries
and skin abrasions.
Wear tight-fitting protective clothing.
This protects you from the draw-in and entanglement
hazard posed by rotating parts.