background image

14

EN

cordless polisher PPOS 10-20V

Disposal

The icon with the crossed-out waste bin on waste

electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website https://de.trotec.com/shop/.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.

Li-Ion

In the European Union, batteries and accumulators must not be
treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6 September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.

Declaration of conformity

The text below sets out the contents of the declaration of
conformity. The signed declaration of conformity can be found
at 

https://hub.trotec.com/?id=44253

.

Declaration of conformity

in accordance with the EC Machinery Directive 2006/42/EC, Annex II, Part 1,

Section A

Herewith, we – Trotec GmbH– declare that the machinery
designated below was developed, constructed and produced in
compliance with the requirements of the EC Machinery
Directive in the version 2006/42/EC.

Product model / Product:

PPOS 10-20V

Product type:

cordless polisher

Year of manufacture as of:

2020

Relevant EU directives:

2012/19/EU: 24 July 2012

2014/30/EU: 29 March 2014

Applied harmonised standards:

EN ISO 12100:2010

EN ISO 20607:2019

EN 62841-1:2015

EN 62841-2-4:2014

Applied national standards and technical specifications:

Regulation (EG) 1907/2006

AfPS GS 2014:01 PAK

EN 55014-1:2017

EN 55014-2:2015

Manufacturer and name of the authorised representative of
the technical documentation:

Trotec GmbH
Grebbener Straße 7, D-52525 Heinsberg
Phone: +49 2452 962-400
E-mail: info@trotec.de

Place and date of issue:
Heinsberg, 

26.01.2020

Detlef von der Lieck, Managing Director

Summary of Contents for PPOS 10-20V
















Reviews: