8
EN
cordless polisher PPOS 10-20V
Technical data
Parameter
Value
Model
PPOS 10-20V
Nominal voltage
20 V
Idle speed
3000 min
-1
Diameter of polishing disc
245 mm
Weight
2.0 kg
Battery
Multiflex 20 – 2.0 DC
Type
Li-ion
Nominal voltage
20 V
Capacity
2 Ah
Quick charger
Multiflex 20 – 2.0 AC
Input
Nominal voltage
230 - 240 V / 50 Hz
Power input
65 W
Output
Nominal voltage
21.5 V
Charging current
2.4 A
Fusing
3.15 A (slow-blowing)
Charging time
1 h
Protection class
II /
Vibration information according to EN 62841
Vibration emission value a
h
9.15 m/s
2
Uncertainty K
1.5 m/s
2
Sound values according to EN 62841
Sound pressure level L
pA
66.4 dB(A)
Sound power L
WA
77.4 dB(A)
Uncertainty K
3 dB
Information on noise and vibration:
•
The specified total vibration
and noise emission values
were measured by means of a test procedure standardized
in EN 62841 and can be consulted for the comparison of
one power tool with another.
•
The specified total vibration
and noise emission values
can also be used for preliminary load assessment.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
•
The actual vibration
and noise emission
may differ from
the stated values during operation of the power tool. This
depends on how the power tool is used and especially on
the type of workpiece being processed. Try to keep the
vibration load to a minimum. Exemplary measures for
reducing the vibration load include wearing gloves during
operation of the tool and the limitation of working hours.
All parts of an operating cycle must be considered for this
(e.g. times at which the power tool is switched off and
times when it is switched on but runs without load).
