background image

1

EN

Operating manual – cordless rotary hammer PRDS 10-20V

Table of contents

Notes regarding the operating manual................................. 1

Safety ..................................................................................... 2

Information about the device................................................ 6

Transport and storage........................................................... 8

Start-up.................................................................................. 9

Operation ............................................................................. 12

Available accessories.......................................................... 14

Errors and faults.................................................................. 15

Maintenance ........................................................................ 16

Disposal ............................................................................... 16

Notes regarding the operating manual

Symbols

Warning of electrical voltage

This symbol indicates dangers to the life and health of
persons due to electrical voltage.

Warning of explosive substances

This symbol indicates dangers to the life and health of
persons due to potentially explosive substances.

Warning of hot surface

This symbol indicates dangers to the life and health of
persons due to hot surface.

Warning

This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.

Caution

This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.

Notice

This signal word indicates important information (e.g.
material damage), but does not indicate hazards.

Info

Information marked with this symbol helps you to carry
out your tasks quickly and safely.

Follow the manual

Information marked with this symbol indicates that the
operating manual must be observed.

Wear head protection

Information marked with this symbol indicates that you
should wear protective headgear.

Wear ear protection

Information marked with this symbol indicates that you
should wear hearing protection.

Wear safety glasses

Information marked with this symbol indicates that you
should wear eye protection.

Wear a protective mask

Information marked with this symbol indicates that you
should wear a protective mask.

Wear protective gloves

Information marked with this symbol indicates that you
should wear protective gloves.

Wear foot protection

Information marked with this symbol indicates that you
should wear safety boots.

You can download the current version of the operating manual
and the EU declaration of conformity via the following link:

PRDS 10-20V

https://hub.trotec.com/?id=41418

Summary of Contents for PRDS 10-20V



















Reviews: