background image

EN

2

Operating manual – cordless rotary hammer PRDS 10-20V

Safety

Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use!

Warning
Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may
result in electric shock, fire and / or serious injury.

Save all warnings and instructions for future
reference.

This appliance can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.

The term 

power tool

 used in the safety warnings refers to both

mains-operated and battery-powered electric tools (with/
without power cable).

General Power Tool Safety Warnings – Work area
safety 

Keep work area clean and well lit.

 Cluttered or dark

areas invite accidents.

Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.

 Power tools create sparks which may ignite the dust

or fumes.

Keep children and bystanders away while operating a
power tool.

 Distractions can cause you to lose control.

General Power Tool Safety Warnings – Electrical
safety

Power tool or power adapter plugs must match the
outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power
tools.

 Unmodified plugs and matching outlets will reduce

risk of electric shock.

Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is
earthed or grounded.

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of
electric shock.

Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.

 Damaged

or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an
extension cord suitable for outdoor use.

 Use of a cord

suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.

 Use of an RCD reduces the risk of

electric shock.

 

Hold power tool by insulated gripping surfaces when

performing an operation where the cutting accessory
may contact hidden wiring or its own cord.

 Cutting

accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.

General Power Tool Safety Warnings – Personal
safety

Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of
drugs, alcohol or medication.

 A moment of inattention

while operating power tools may result in serious personal
injury.

Use personal protective equipment. Always
wear eye protection.

 Protective equipment such

as protective mask, non-skid safety shoes, hard
hat, hearing protection or tight-fitting protective
clothing used for appropriate conditions will
reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.

 

Remove any adjusting key or wrench before turning

the power tool on.

 A wrench or a key left attached to a

rotating part of the power tool may result in personal
injury.

Do not overreach. Keep proper footing and balance at
all times.

 This enables better control of the power tool in

unexpected situations.

Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.

 Loose clothes, jewellery or long hair

can be caught in moving parts.

Summary of Contents for PRDS 10-20V



















Reviews: