EN
6
Operating manual – rotary hammer PRDS 10-230V
Technical data
Parameter
Value
Model
PRDS 10-230V
Mains connection
1/N/PE ~ 230-240 V/ 50 Hz
Power consumption
1500 W
Idle speed
0 – 750 rpm
Impact frequency
0 – 3900 spm
Impact energy
5 J
Speed levels
6
Chucking range
Max. 13 mm
Max. drilling diameter
wood
metal
concrete
40 mm
13 mm
32 mm
Weight
5 kg
Protection class
II /
Sound values according to EN 60745
Hammer drilling
Sound pressure level
95 dB(A)
Sound power level
106 dB(A)
Uncertainty K
3 dB(A)
Chiselling
Sound pressure level
84 dB(A)
Sound power level
95 dB(A)
Uncertainty K
3 dB(A)
Vibration information according to EN 60745
Vibration emission value for
hammer drilling in concrete
(ah=in)
14.8 m/s
2
Uncertainty K
1.5 m/s
2
Vibration emission value for
chiselling (ah=in)
15.5 m/s
2
Uncertainty K
1.5 m/s
2
Wear hearing protection.
Excessive noise can lead to hearing loss.
Information on noise and vibration:
•
The vibration level specified in these instructions was
determined by means of a measuring method standardized
in EN 60745 and can be used for a device comparison. The
specified vibration emission value may also be used for a
preliminary assessment of the exposure.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
•
The vibration level will change depending on the
application of the power tool and may in some cases differ
from the value specified in these instructions. The vibration
load may be underestimated if the power tool is used
regularly in such a way. For a precise estimation of the
vibration load during a certain work period, it is also
important to consider the periods during which the device
is switched off, or is running but not actually employed.
This can reduce the vibration load over the entire work
period significantly.
