EN
14
Operating manual – rotary hammer PRDS 10-230V
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.
Declaration of conformity
The text below sets out the contents of the declaration of
conformity. The signed declaration of conformity can be found
at
http://hub.trotec.com/?id=39780
.
Declaration of conformity
In accordance with the EC Machinery Directive 2006/42/EC,
Annex II, part 1, Section A
Herewith, we – Trotec GmbH & Co. KG – declare that the
machinery designated below was developed, constructed and
produced in compliance with the requirements of the
EC Machinery Directive in the version 2006/42/EC.
Product model / Product:
PRDS 10-230V
Product type:
rotary hammer
Year of manufacture as of:
2016
Relevant EU directives:
•
2011/65/EU: 1 July 2011
•
2014/30/EU: 29 March 2014
Applied harmonised standards:
•
EN ISO 12100:2010
•
EN 55014-1:2006+A2:2011
•
EN 55014-2:2015
•
EN 60745-1:2009+A11: 2010
•
EN 60745-2-6:2010
•
EN 61000-3-2:2014
•
EN 61000-3-3:2013
Applied national standards and technical specifications:
•
AfPS GS 2014:01 PAK
Manufacturer and name of the authorised representative of
the technical documentation:
Trotec GmbH & Co. KG
Grebbener Straße 7, D-52525 Heinsberg
Phone: +49 2452 962-400
E-mail: info@trotec.de
Place and date of issue:
Heinsberg,
06.12.2016
Detlef von der Lieck, Managing Director
