24 / 53
8018_SP1500
V2.2_EN (03/2018)
6 Transport - Storage - Setup
6.1 Forklift transport
You receive your SP1500 packed in a wooden crate. If possible keep the packing box. You might
require it in case of a return.
1. Remove the top cover of the wooden box. Then the side covers. For this work we strongly
recommend to use an electric screwdriver.
SP1500 kept in position by wooden spacers
Please note that the machine housing is reinforced only on certain positions so that a fork lift truck
can lift the machine.
The following suspension points are
available:
-
machine front and back
-
left and right side
These positions are marked. See also the
yellow colored bars besides (bottom
view).
Never place the forks on other positions,
as this could cause severe damages on
the housing and affect cutting precision
as well as life expectancy of the motion
system.
The machine may only be lifted and
transported:
- under the guidance of a 2nd person
- at the marked points
- with a fork lift carrying 2000kg (4.4 lb)
and
- forks of minimum 2m length
Summary of Contents for SP1500
Page 1: ...SP1500 Operation Manual...
