34 / 53
8018_SP1500
V2.2_EN (03/2018)
Vacuum on/off key
(9)
When this key is pressed it lights and vacuum is
switched on for the vacuum table
Standby key
(10)
During machine operation key illumination is off.
When the key is pressed it lights and the machine is in
Standby mode, i.e.:
- Laser in Ready state
- Lighting of work table is deactivated
- Blowers for laser tubes are deactivated
Pause key
(11)
During machine operation key illumination is off.
When the key is pressed it lights and the work process being
executed is stopped
Lamp for service plug
(12)
Lights when a service plug is inserted (Technician)
Start (Repeat) key
(13)
Key for starting the job program and repeating the last job
program; see programming manual regarding this
“Shift” key for 2nd function key level
(14)
For additional operations. When this key is pressed
together with the following keys, the functions indicated are
activated:
Vacuum on/off key
(9):
Air assist on/off
Pause key
(11):
Stops the job program
Working head keys
(16) to (19)
These keys drive the laser head to the end
position (left/backwards)
Start key
(13):
Tests the laser for proper function
LED status indicator for laser beam
(15)
Lightened when laser is operating
Summary of Contents for SP1500
Page 1: ...SP1500 Operation Manual...
