Pre-Installation Instructions
8014 Trotec Speedy 500
Laser Machine Requirements
13/12/2011
Trotec Produktions- und Vertriebs GmbH
_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support
5 / 15
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
techsupport@troteclaser.com
1.4 Floor plan for the Speedy 500
It is necessary to have sufficient clear space to the sides, front and rear of the machine for
installation, operation and maintenance.
Top View
1000mm
39.37”
1000mm
39.37”
1000mm
39.37”
1000mm
39.37”
Rear View
Mains power inlet, PC connection and exhaust port locations.
Power
Connection
PC-
Connection
Head Exhaust-
Connection
Table Exhaust-
Connection
440mm
17.32”
Chiller, Gas,
Compressed Air inlet
190mm
7.48”
440mm
17.32”
115mm
4.53”
