Trotec TEH 200, Original Instructions Manual

EN

5

electric heater TEH 200 / TEH 300 / TEH 400

Device depiction

1

2

3

4

5

6

7

8

9

8

10

11

12

No.

Designation

1

Control panel with electrical control box

2

Transport lug

3

Shock protection frame

4

Air outlet with hose connection

5

Swivel castor (lockable)

6

Forklift pockets

7

Trestle rollers/ fixed castors

8

Lateral cover panel

9

Main switch with emergency stop function

10

Air inlet with weather protection grid and air filter access

11

Mains connection: CEE plug, 5-pin

12

Cover flap electrical control box

Transport and storage

Note

If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.

Transport

•

Remove all packing materials which serve to protect the
device during transport.

•

Should the electric heater be damaged, please contact the
responsible dealer or manufacturer, where the purchase
was made.

•

The electric heater may only be lifted at the points
provided with lifting gear (forklift pockets (6), transport
lugs (2)) intended for handling. The carrying capacity of the
lifting gear must be suitable for the weight of the electric
heater (see technical data).

2

5

6

7

To make the device easier to transport, it is fitted with wheels.
Only wheel the device on firm, level ground.

The following should be observed 

before

 transporting the

device using the 

castors

:

Warning

Trip hazard! Make sure that nobody is situated in the
immediate proximity.

The following should be observed 

before

 transporting the

device using 

lifting gear

:

Warning

Risk of injury from suspended loads. Make sure that
nobody is situated in the immediate proximity.

•

Only instructed persons are allowed to perform the
transport by use of lifting gear.

•

Consider the centre of gravity when transporting the load.

The following should be observed 

after

 transporting the device:

•

Lock the swivel castors (5)!