EN
13
fan heater TFC 21 E
Cleaning the air filter
Note
Ensure that the air filter is not worn or damaged. The
air filter edges must not be deformed. Before
reinserting the air filter, make sure that it is
undamaged and dry!
The air filter has to be cleaned as soon as it is dirty. This is
brought to light e.g. by a reduced capacity (see chapter Errors
and faults).
1. Remove the air filter (
6
) from the device.
6
I.
II.
2. Clean the air filter (
6
) using a slightly damp, soft, lint-free
cloth. If the filter is heavily contaminated, clean it with
warm water mixed with a neutral cleaning agent.
3. Allow the air filter (
6
) to dry completely. Do not insert a wet
filter into the device!
4. Reinsert the air filter (
6
) into the device.
6
II.
I.
