background image

EN

3

axial fan TTV 4500 / TTV 4500 HP / TTV 7000

Safety

Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use!

Warning
Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may
result in electric shock, fire and / or serious injury.

Save all warnings and instructions for future
reference.

This appliance can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.

Do not use the device in potentially explosive rooms.

Do not use the device in aggressive atmosphere.

Set the device up in an upright and stable position.

Observe a minimum distance of 3 m between walls,
objects and the suction side.

Let the device dry out after a wet clean. Do not operate it
when wet.

Do not use the device with wet or damp hands.

Do not expose the device to directly squirting water.

Never insert any objects or limbs into the device.

Do not cover or transport the device during operation.

Do not sit on the device.

This appliance is not a toy! Keep away from children and
animals. Do not leave the device unattended during
operation.

Check accessories and connection parts for possible
damage prior to every use of the device. Do not use any
defective devices or device parts.

Ensure that all electric cables outside of the device are
protected from damage (e.g. caused by animals). Never
use the device if electric cables or the power connection
are damaged!

The electrical connection must correspond to the
specifications in chapter Technical data.

Insert the mains plug into a properly secured mains
socket.

Observe the technical data when selecting extensions to
the power cable. Completely unroll the extension cable.
Avoid electrical overload.

Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.

Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.

Do not under any circumstances use the device if you
detect damages on the mains plug or power cable. 
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk!

When positioning the device, observe the minimum
distances from walls and other objects as well as the
storage and operating conditions specified in the Technical
data chapter.

Make sure that the air inlet and outlet are not obstructed.

Make sure that there are no loose items or dirt located in
the immediate surroundings of air inlet and air outlet.

Protect yourself and your environment from whirled up
parts.

Improper installation can lead to a fire, electric shock or
severe personal injury.

Intended use

The axial fan 

TTV 4500

 / 

TTV 4500 HP

 / 

TTV 7000

 may be used

for aeration, deaeration, air circulation, dust collection or air
transport whilst adhering to the technical data and the safety
instructions.
The device was designed for the generation of a powerful,
large-volume air circulation, e.g. for the accelerated drying of
buildings and rooms. The fan can be operated in combination
with different accessories.

Improper use

The axial fan 

TTV 4500

 / 

TTV 4500 HP

 / 

TTV 7000

 is not suited

for installation in fluids or on flooded or boggy grounds.
Any unauthorised changes, modifications or alterations to the
device are forbidden.

Personnel qualifications

People who use this device must:

be aware of the dangers that occur when using high-
performance fans.

have read and understood the instructions, especially the
Safety chapter.

Summary of Contents for TTV 4500














Reviews: