background image

4

EN

axial fan TTV 4500 / TTV 4500 HP / TTV 7000

Residual risks

Warning of electrical voltage

Work on the electrical components must only be
carried out by an authorised specialist company!

Warning of electrical voltage

Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.

Warning

Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!

Warning

The device is not a toy and does not belong in the
hands of children.

Warning

Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.

Caution

Risk of injury due to parts being whirled up by the
strong air current.
Before switching the device on, make sure that there
are no loose parts (clothing, hair etc.) located near the
air inlet or outlet!

Caution

Keep a minimum distance of 3 m to the suction side of
the device!

Note

Do not use abrasive cleaners or solvents to clean the
device.

Behaviour in the event of an emergency

1. In an emergency, disconnect the device from the mains

feed-in: Switch the device off and disconnect it from the
mains.

2. Remove persons from the danger area.
3. Do not reconnect a defective device to the mains.

Information about the device

Device description

The axial fan TTV 4500 / TTV 4500 HP / TTV 7000 was designed
for a very high air flow; the TTV 4500 HP was additionally
designed for particularly high air pressure even over long air
transport distances.
The device is rated with IP55 type of protection and is thus
suitable for application both inside rooms and outdoors.
The fan speed can be set to one of 3 stages.
Depending on the type, the devices can be expanded with a
range of accessories. For example, one or two hose adapters
may be used for connecting air transport hoses and/or dust
bags. Furthermore, some device sizes allow the connection of a
combination distributor e. g. for air distribution with up to eight
hoses.

Summary of Contents for TTV 4500














Reviews: