6
EN
tower fan TVE 31 T / TVE 32 T
Operation
Operating elements
7
8
9
10
11
°
c
12
13
14
15
16
No.
Designation
Meaning
7
OSC
button
Activating and deactivating the
oscillation function
8
TIMER
button
Timer function for automatic
switch-off
Setting the number of hours of the
activated timer
9
MODE
button
Selecting the operating mode:
normal operation
natural wind
night mode
10
Fan stage
button Setting the fan stage (1–3)
stage 1 = low fan speed
stage 2 = medium fan speed
stage 3 = high fan speed
11
ON/OFF
button
Switching the device on and off
12
Fan stage
indication
Indicates the set fan stage
13
Indication of the
unit
Indication of the unit (hours / degrees
Celsius)
14
Temperature/
timer segment
display
• Room temperature indication
• Indication of the number of hours of
the activated timer in increments of
1 hour
15
Oscillation
indication
Indicates whether the oscillation
function is activated
16
Operating mode
LEDs
Indicate the selected operating mode:
=
normal operation
=
natural wind
=
night mode
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Press the
ON/OFF
button (11).
ð
An acoustic signal is emitted and the device starts up in
normal operation
mode at fan stage 1.
Setting the operating mode
The device has the following operating modes:
•
normal operation
•
natural wind
•
night mode
Normal operation
In
normal operation
mode the fan keeps running at the desired
fan stage. The fan stage can be set from 1 to 3 in this operating
mode and is shown on the fan stage indication (12).
Please proceed as follows to set the fan stage in
normal
operation
mode:
1. Press the
MODE
button (9) until the =
normal operation
LED lights up among the operating mode LEDs (16).
ð
The device runs in
normal operation
mode.
2. Press the
fan stage
button (10) to switch between the fan
stages.
ð
The selected fan stage is indicated by the fan stage
indication (12).
ð
The device keeps running at the set fan stage.
Natural wind
In
natural wind
mode, the fan speed automatically increases
and decreases alternately to generate a pleasant, natural air
stream. You can set the fan stage manually from 1 to 3 in this
mode.
Please proceed as follows to activate
natural wind
mode:
1. Press the
MODE
button (9) until the =
natural wind
LED
lights up among the operating mode LEDs (16).
ð
The device switches to
natural wind
mode.
2. Press the
fan stage
button (10) to switch between the fan
stages.
ð
The selected fan stage is indicated by the fan stage
indication (12).
