A
Commissioning report
Building:
Date:
__ . __ . 20__
Fan type:
Company number:
Approval number
CE-EN 12101-3 (BV only)
Rating plate data
Name
Item
Unit
Volume flow rate
m
3
/h
Speed
rpm
Density
kg/m
3
Motor type
Motor no.
Nominal voltage
V
Nominal voltage
A
Mains frequency
Hz
Nominal power
kW
Motor speed
rpm
Operating conditions
Name
Comment / specification
Operating mode
Operation on demand
☐
Combined ventilation and smoke extract operation
☐
Flow medium
Clean Air
☐
Dust-laden air
☐
Other medium
☐
Installation
Vertical installation location
☐
Horizontal installation location
☐
Fan assembled on vibration isolators
☐
Fan assembled with flexible connectors
☐
Checklist
Before commissioning, the system must be checked using the following checklist. If all the points on the
checklist have been met, the fan is ready for commissioning using the control installed on the customer’s
premises.
No.
Check
1
Fan is free of foreign matter (tools, dirt, etc.).
☐
2
Impeller rotates freely.
☐
3
Impeller gap corresponds to information provided in Chapters 12.3.4 and 12.3.5
☐
4
Screw connections are secure (see screw tightening torques in Chapter 12.3.1).
☐
Commissioning report
Centrifugal fans REH; RZH; BVREH; BVRA
47
