3
Supply package, transport
and storage
Supply package
If attachments and accessories are supplied from the
factory with the fire dampers, they are already taken into
account in the order code.
Depending on the installation situation, supplementary
materials for assembly and fixing may be needed to
ensure proper installation, e.g. mortar, screws, mineral
wool, etc.
Such materials are not included in the supply package,
unless they are expressly described as included in the
supply package.
The selection of additional attachments or accessories
as well as the identification and provision of materials
for assembly and fixing is the responsibility of those
involved in the building project and must be done taking
into account the required classification.
Delivery check
Check delivered items immediately after arrival for
transport damage and completeness. In case of any
damage or an incomplete shipment, contact the ship-
ping company and your supplier immediately.
Fire damper
–
Attachments/accessories, if any
Operating manual (1 per shipment)
Colour hues on the damper blade
The blades of fire dampers are treated with a
greenish impregnating agent. Resulting colour hues
on the damper blade are due to technical reasons
and do not constitute a defect of any kind.
Transport on site
If possible, take the product in its transport packaging
up to the installation location.
Bearing
For temporary storage please note:
Remove any plastic wrapping.
Protect the product from dust and contamination.
Store the product in a dry place and away from
direct sunlight.
Do not expose the unit to the effects of weather (not
even in its packaging).
Do not store the product below -40 °C or above 50
°C.
Packaging
Properly dispose of packaging material.
Supply package, transport and storage
Fire damper Type FKA2-EU
22
