Accessories 1
Installation kit TQ
FKR-EU
1
/
TQ
/
Order code detail
Application
– Square installation kit TQ (for FKR-EU
in construction with spigots) for dry mortarless
installation into lightweight partition walls with
metal support structure or steel substructure
and cladding on both sides, fire walls with
metal support structure and cladding on both
sides as well as into timber stud walls
and half- timbered constructions
– The installation kit is factory
mounted to the fire damper
– The unit is installed without a mortar
mix by simply inserting it into the prepared
installation opening
– In the event of a fire the intumescent
seal closes the remaining gap.
– A cover plate conceals any gaps
and is used for screw fixing
Materials and surfaces
– Installation kit made of calcium silicate
– Cover plate of the installation kit made of
galvanised sheet steel (and powder-coated
silver grey, RAL 7001, when used with powder-
coated (1) and stainless steel (2) dampers)
Note
For further information relevant to design,
in particular information on installation situations,
please refer to the operating
and installation manual.
Description
K4 – 1.1 – 13
Technical data
Accessories 1
Order code
Square installation kit
TQ
Installation opening/cover plate dimensions [mm]
Nominal size
315
355
400
450
500
560
630
710
800
□A
435
475
520
570
620
680
750
830
920
□B1
515
555
600
650
700
760
830
910
1000
Weight in kg for FKR-EU with fusible link and installation kit TQ
Nominal size
315
355
400
450
500
560
630
710
800
Installation kit TQ
19.5
21.8
25.0
33.1
37.8
42.6
49.7
58.7
67.3
FKR-EU with spring return actuator: 1.8 kg (with BFN actuator) / + 3.0 kg (BF actuator).
03/2017 – DE/en
FKR-EU with square installation kit TQ
□
A
□
B1
④
③
①
②
① Installation kit
② Seal
③ Cover plate
④ Lightweight partition wall or fire wall
TOC