Information on the transportation and installation
manual
This transport and installation manual enables operating
or service personnel to use the X-CUBE air handling
unit (AHU) safely and efficiently.
The manual must be kept near the unit to be available
for use at all times.
This transport and installation manual is intended for
use by fitting and installation companies, operators, in-
house technicians, technical staff or properly trained
persons, and skilled qualified electricians or air condi-
tioning technicians.
It is essential that these individuals read and fully under-
stand this manual before starting any work. The basic
prerequisite for safe working is to comply with the safety
notes and all instructions in this manual.
The local regulations for health and safety at work and
the general safety regulations for the area of application
of the air handling unit also apply.
Illustrations in this transport and installation manual are
mainly for information and may differ from the actual
design of the air handling unit.
Other applicable documentation
In addition to these instructions, the following docu-
ments apply:
Order-specific approval drawing
Order-specific air handling unit data sheet from
TROX
Data sheets for components from other suppliers, if
any
Circuit diagram for air handling unit with controls
Additional drawings, if any
X-CUBE operating manual
TROX Technical Service
To ensure that your request is processed as quickly as
possible, please keep the following information ready:
Product name
TROX order number
Delivery date
Brief description of the fault
Online
www.troxtechnik.com
Phone
+49 2845 202-400
Copyright
This document, including all illustrations, is protected by
copyright and pertains only to the corresponding
product.
Any use without our consent may be an infringement of
copyright, and the violator will be held liable for any
damage.
This applies in particular to:
Publishing content
Copying content
Translating content
Microcopying content
Saving content to electronic systems and editing it
Limitation of liability
The information in this manual has been compiled with
reference to the applicable standards and guidelines,
the state of the art, and our expertise and experience of
many years.
The manufacturer does not accept any liability for dam-
ages resulting from:
Non-compliance with this manual
Incorrect use
Operation or handling by untrained individuals
Unauthorised modifications
Technical changes
Use of non-approved replacement parts
The actual scope of delivery may differ from the infor-
mation in this manual for bespoke constructions, addi-
tional order options or as a result of recent technical
changes.
The obligations agreed in the order, the general terms
and conditions, the manufacturer's terms of delivery,
and the legal regulations in effect at the time the con-
tract is signed shall apply.
We reserve the right to make technical changes.
Warranty claims
The provisions of the respective general delivery terms
apply to warranty claims. For purchase orders placed
with TROX GmbH, these are the regulations in section
"Vl. Warranty claims" of the Delivery Terms of TROX
GmbH, see
www.trox.de/en/
.
Supplemental directives
Air handling unit X-CUBE X2 / X-CUBE X2 compact
3
