Fig. 47: X-CUBE controller CX9020, network connec-
tions
①
X000 - Port for the touch panel
②
X001 - Port for a BMS computer or for another X-
CUBE unit (e.g. daisy chain)
Connection: Use network cables with RJ45 plugs (at
least cat. 5).
Factory set network address – X000 / X001
IP address
192.168.0.200
Subnet mask
255.255.255.0
Standard gateway
192.168.0.1
Setting the IP address for X000 and X001
Fig. 48: Cerhost software download
1.
Go to
http://infosys.beckhoff.com/
and search for
cerhost
, then download the software and install
it on a PC or notebook.
2.
Use a network cable to connect to port X000 the
PC or notebook on which you have installed
‘Cerhost’
. If the port is already being used, e.g.
for the touch panel, pull out the cable.
3.
Start
‘Cerhost’
.
ð
The starting screen is displayed.
Installation
Connecting the controls to your PC or local netw... > X-CUBE controller CX9020
Air handling unit X-CUBE X2 / X-CUBE X2 compact
47
