Fig. 56: Settings
3.
In the
‘Settings’
window select
‘OS Settings...’
.
Fig. 57: Setup Main
4.
In the
‘Setup Main’
window select
‘Network
Settings’
.
Fig. 58: Network Settings
5.
In the
‘Network Settings’
window select
‘Fix
Settings’
. Enter the password
+-+-
again.
Fig. 59: Change IP Settings
6.
In the
‘Change IP Settings’
window select
‘IP
Address’
.
Fig. 60: IP Address
7.
In the
‘IP Address’
window enter the new IP
address and subnet for the touch panel. Confirm
your entries with
‘OK’
. In the
‘Change IP
Settings’
window ( Fig. 59 ) select
‘Gateway’
.
Network addresses and settings
The network addresses (IP, subnet and
gateway) have to be the same as the settings
on controller CX9020.
Installation
Connecting the controls to your PC or local netw... > X-CUBE controller CX9020
Air handling unit X-CUBE X2 / X-CUBE X2 compact
50
