Skilled qualified electrician
Skilled qualified electricians are individuals who have
sufficient professional or technical training, knowledge
and actual experience to enable them to work on elec-
trical systems, understand any potential hazards related
to the work under consideration, and recognise and
avoid any risks involved.
2.3 Personal protective equipment
Description of personal protective equipment
Hearing protection
Hearing protection protects against hearing damage
resulting from noise exposure.
Industrial safety helmet
Industrial safety helmets protect the head from falling
objects, suspended loads, and the effects of striking the
head against stationary objects.
Protective clothing
Protective clothing is close-fitting, with low tear resist-
ance, close-fitting sleeves, and no projecting parts.
Protective gloves
Protective gloves protect hands from friction, abrasions,
punctures, deep cuts, and direct contact with hot sur-
faces.
Safety harness
A safety harness protects people from a fall when they
are working at height. You are at risk from a fall if the
task is at height and if there is no railing in place.
When you put on a safety harness, connect it via an
energy-absorbing lanyard to a suitable anchor point.
Safety harnesses must only be used by individuals who
have been specifically trained to use them.
Safety shoes
Safety shoes protect the feet against crushing, falling
parts, and from slipping on slippery ground.
2.3.1 Residual risks
Suspended loads
DANGER!
Danger of death due to suspended loads!
Falling loads may cause serious injury or death.
Therefore:
–
Never walk under suspended loads.
–
Only move loads under supervision.
–
Observe the specifications for the intended
lashing points.
–
Do not attach the lifting gear to protruding
machine parts or lugs on attached components
–
Ensure that the lifting gear is secure.
–
Only use approved hoisting devices and lifting
gear with with sufficient load-bearing capacity.
–
Do not use any frayed or worn ropes and belts.
–
Do not place ropes or belts near sharp edges or
corners; do not knot or twist.
–
Place the load on the ground before leaving the
workplace.
Safety
Personal protective equipment > Residual risks
Air handling unit X-CUBE X2 / X-CUBE X2 compact
9