Troy-Bilt 49MRBESP966, Operator'S Manual

Read the Operator’s Manual and follow all warnings and safety
instructions. Failure to do so can result in serious injury to the operator
and/or bystanders.

GENERAL POWER TOOL SAFETY WARNINGS

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.

Work area safety:

a)

Keep work area clean and well lit.

Cluttered or dark areas invite

accidents.

b)

Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.

Power tools create

sparks which may ignite the dust or fumes.

c)

Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

Electrical safety:

a)

Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b)

Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators.

There is an increased risk of

electric shock if your body is earthed or grounded.

c)

Do not expose power tools to rain or wet conditions.

Water entering a

power tool will increase the risk of electric shock.

d)

Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts.

Damaged or entangled cords increase the risk

of electric shock.

e)

When operating a power tool outdoors, use an extension cord
suitable for outdoor use .

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f)

If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply.

Use of an RCD

reduces the risk of electric shock.

Personal safety:

a)

Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.

A moment of

inattention while operating power tools may result in serious personal injury.

b)

Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.

c)

Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up
or carrying the tool.

Carrying power tools with your finger on the switch

or energizing power tools that have the switch on invites accidents.

d)

Remove any adjusting key or wrench before turning the power tool
on.

A wrench or a key left attached to a rotating part of the power tool

may result in personal injury.

e) 

Do not overreach. Keep proper footing and balance at all times.

This

enables better control of the power tool in unexpected situations.

f)

Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts.

Loose clothes, jewelry or

long hair can be caught in moving parts.

g)

If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

Power tool use and care:

a) 

Do not force the power tool. Use the correct power tool for your

application.

The correct power tool will do the job better and safer at the

rate for which it was designed.

b)

Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.

c)

Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools.

Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d)

Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e)

Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired
before use.

Many accidents are caused by poorly maintained power tools.

f)

Keep cutting tools sharp and clean.

Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to control.

g)

Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
the work to be performed.

Use of the power tool for operations different

from those intended could result in a hazardous situation.

Battery tool use and care:

a) 

Recharge only with the charger specified by the manufacturer.

A

charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.

b) 

Use power tools only with specifically designated battery packs.

Use

of any other battery packs may create a risk of injury and fire.

c) 

When battery pack is not in use, keep it away from other metal

objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to
another.

Shorting the battery terminals together may cause burns or a fire.

d) 

Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help.

Liquid ejected

from the battery may cause irritation or burns.

Service:

a)

Have your power tool serviced by a qualified repair person using only
identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

• IMPORTANT SAFETY INSTRUCTIONS •

The purpose of safety symbols is to attract your attention to possible
dangers. The safety symbols, and their explanations, deserve your careful
attention and understanding. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they give are not
substitutes for proper accident prevention measures.

SYMBOL

MEANING

NOTE:

Advises you of information or instructions vital to the operation or

maintenance of the equipment.

WARNING:

Failure to obey a safety warning can result in injury

to yourself and others. Always follow the safety precautions to
reduce the risk of fire, electric shock and personal injury.

CAUTION:

Failure to obey a safety warning may result in

property damage or personal injury to yourself or to others.
Always follow the safety precautions to reduce the risk of fire,
electric shock and personal injury.

DANGER:

Failure to obey a safety warning will result in serious

injury to yourself or to others. Always follow the safety precautions
to reduce the risk of fire, electric shock and personal injury.

RULES FOR SAFE OPERATION

2

CALIFORNIA PROPOSITION 65
WARNING:

Battery posts, terminals and certain finished

components contain lead, lead compounds and chemicals known
to the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.

MEASURE MEANINGS

V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Volts
A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Amps
Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hertz

WARNING:

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.