Troubleshooting
6
11
Problem
Cause
Remedy
Excessive Vibration
1. Loose parts or damaged impeller.
1. See authorized service dealer.
Unit does not discharge
1. Discharge area clogged.
2. Foreign object lodged in impeller.
1. Stop engine, make certain the chipper shredder has
come to a complete stop, and disconnect the FLEX™
Power Base from the attachment. Clean flail screen and
inside of discharge opening. See Maintenance & Service
section under Cleaning the Reduction Chamber.
2. Stop engine, make certain the chipper shredder has
come to a complete stop, and disconnect the FLEX™
Power Base from the attachment. Remove lodged
object.
Rate of discharge slows considerably
or composition of discharged
material changes
1. Chipper blade dull.
1. Replace chipper blade or see your authorized service
dealer.
Weak Chipping
1. Chipper blade dull.
2. Worn belt.
1. Replace chipper blade or see your authorized service
dealer.
2. See authorized service dealer to have your belt
replaced.
Unit does not function
1. Broken belt.
1. See authorized service dealer to have your belt
replaced.
Replacement Parts
7
Component
Part Number
Description
942-0544B
Chipper Blade
742-05239
Shredder Blade
753-08457
Clutch Bumpers Kit (6)
Phone (800) 828-5500 to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are
also available free of charge at www.troybilt.com.
Summary of Contents for FLEX Chipper Shredder
Page 23: ...23 Notes...