8
For edging (when using the line head cutting attachment
with EZ-Link™ models), lock the release button of the
cutting attachment into the 90° edging hole or the 180°
edging hole (Fig. 8).
OPERATING THE EZ-LINK
™
SYSTEM
The EZ-Link™ system enables the use of these optional
Add-Ons:
Blower/Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . . TBBV
Cultivator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBGC
Edger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBLE
Hedge Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . TBHS
Snow Thrower . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBST
Straight Shaft Trimmer . . . . . . . . . . . . . . . . . . . . . . TBSS
Tree Pruner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBTP
Turbo Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBTB
Removing the Cutting Attachment or Add-Ons
1. Turn the knob counterclockwise to loosen (Fig. 6).
2. Press and hold the release button (Fig. 6).
3. While firmly holding the upper shaft housing, pull
the cutting attachment or add-on straight out of the
EZ-Link™ coupler (Fig. 6).
Installing the Cutting Attachment or Add-Ons
NOTE: Place the unit on the ground or on a work bench
to make add-on installation or removal easier.
1. Turn knob counterclockwise to loosen (Fig. 6).
Fig. 6
EZ-Link™ Coupler
Release Button
Guide Recess
Knob
Primary Hole
Upper Shaft Housing
EZ-Link™ Coupler
2. While firmly holding the add-on, push it straight into
the EZ-Link™ coupler (Fig. 7).
NOTE: Aligning the release button with the guide recess
will help installation (Fig. 6).
3. Turn the knob clockwise to tighten (Fig. 8).
Fig. 7
Fig. 8
Knob
Lower Shaft Housing
Release Button
90˚ Edging Hole
(Trimmer Only)
180˚ Edging Hole
(Trimmer Only)
OPERATING INSTRUCTIONS
CAUTION:
The cutting attachment and add-
ons with the EZ-Link™ system are to be used in
the primary hole unless stated otherwise in the
specific add-ons operator’s manual. Using the
wrong hole could lead to personal injury or
damage to the unit.
CAUTION: Lock the release button in the
primary hole and securely tighten the knob
before operating this unit
WARNING: To avoid serious personal injury
and damage to the unit, shut off the unit
before removing or installing add-ons.
WARNING: Read and understand the
operator’s manual for each add-on prior to
operation.
Summary of Contents for TB32CS
Page 48: ...E16 NOTAS...
Page 49: ...E17 NOTAS...
