background image

1.  Turn the phone on by holding down the 

No

key for several seconds.

2.  Push the right arrow key five times until you see 

5 Extras

.

3.  Push the 

Yes

key.

4.  Push the 4 key to select 

Bluetooth

.

5.  Click the 3 key to discover the available Bluetooth devices on the network.  You

should get the message "

Searching

"

6. The WindConnect Bluetooth Print Adapter should appear in the list of available

devices.  Use the down arrow key to choose it and ten press the 

Yes

key to select it.

7.  Press the 1 key to select "

Add to Paired

". 

8.  Enter the passkey that you selected in the previous section and press 

Yes

.

You can now print from the phone as follows:

1.  Press the right arrow button one time.  You should see "

1 Phone Book

" (if

not, keep pressing it until you do).

2.  Press the 

Yes

key.

3.  Press the 4 key to select "

Business cards

".

4.  Press the 1 key to select "

Send my own

" (or select a specific card).

5.  Press the 2 key to select "

Via Bluetooth

".  You will see the message

"Searching", and then you will get a list of the Bluetooth devices in the area.

6.  Use the down arrow and press 

Yes

to select the Print Adapter.

7.  Press the 

1

key to send the business card.  

8.  Press the 

2

key to send via Bluetooth.

9.  Press the 

1

key to send to the WindConnect Bluetooth Print Adapter. You will get

the messages "

Connecting

" and "

Sending

", after which the document will

print.  

3-6

Summary of Contents for WindConnect



































Reviews: