background image

For European Users

This product is in conformity with the protection requirements of EU Council
Directive 89/336/EEC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.  TROY Group cannot be responsible for
any failure to satisfy the protection requirements resulting from a nonrecommend-
ed modification of the product. 

This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to CISPR 22/European Standard
EN55022.  The limits for Class B equipment were derived for typical residential
environments to provide reasonable protection against interference with licensed
communications devices.

For Canadian Users

This Class B apparatus complies with Canadian ICES-003.

Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada.

DECLARATION of CONFORMITY

According to 47CFR, Part 2 and 15 for Class B Personal
Computers and Peripherals; and/or CPU Boards and Power
Supplies used with Class B Personal Computers:

We:

TROY GROUP, INC.

Located at:

1692 Browning
Irvine, CA 92606 USA

Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product
marketed is identical to the representative unit tested and found to be compliant
with the standards.  Records maintained continue to reflect the equipment being
produced can be expected to be within the variation accepted, due to quantity
production and testing on a statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Trade Name:

TROY

Type of Product:

Bluetooth Print Adapter

Model

WindConnect

7-2

Summary of Contents for WindConnect



































Reviews: