TRU-BOLT 0711016, User Manual

Page 14

PC

4

Re-enter

PC

new

PC

PC

5

Ti me V alue

PC

5

00

PC

6

1 or 2

1 = Sound Off
2 = Sound On

Advanced Functions

6. CHANGE CURRENT OR PRESET PROGRAMING CODE 

Factory default Programming Code       = 123456, this is the master password for your lock. 
All programming functions require this code. Follow the below sequence to change the 
Programming Code       to your custom 6 digit combination.

Hear 1 beep and Light Indicator illuminates green

7. SET OR CANCEL AUTO LOCK 

You can set the lock to automatically close after each time the lock is opened. Time value 
range = 20 - 900 seconds, enter the following: 

Set Auto Lock:

Hear 1 beep and Light Indicator illuminates green

To cancel Auto Lock set the time to 00, enter the following:

Cancel Time Value Auto Lock:

Hear 1 beep and Light Indicator illuminates green

8. TEMPORARILY DISABLE AUTO LOCK

Disable: 

While in Auto-Lock mode, unlock door using       , within 10 seconds you must turn 

the  locking knob by hand to the locked position, wait more than 2 seconds then turn the 
locking knob back to the unlock position. The Auto-Lock mode is now disabled.

Restore: 

To restore the Auto-Lock function, you can turn the locking knob by hand to the 

locked position, wait more than 2 seconds or press the       Lock button on the keypad.

9. TURN ON AND OFF SOUND

You can “mute” or turn the “sound on” on your lock by entering the following. (Factory setting is 
sound on)

Sound Off (1) - Light Indicator illuminates green 
Sound On (2) - Hear 1 beep and Light Indicator illuminates green

PC

PC

PC

PC