Page 6
5. IDENTIFYING YOUR DOOR HANDING
a. If the hinges are on the left your door is Left Handed
b. If the hinges are on the right your door is Right Handed
Stand outside the door
You are standing outside the door
Right Handed Door
Hinges are on the right side
Left Handed Door
Hinges are on the left side
Right Handed Door
Hinges are on the right side
Left Handed Door
Hinges are on the left side
Out Swing Door
In Swing Door
fig. 5
4. Deadbolt Latch must be retracted when installing
a. Insert Deadbolt Latch into door edge hole with the word UP and
the arrow on the extension plate facing UP. Cross shaped spindle
connector will be at the bottom of the Deadbolt Latch.
b. Make sure the face plate sits flush with the door. Do not force the
latch into the mortise flush. Chisel out excess material if necessary
for a flush fit.
c. Using two screws (A) provided, screw the latch into the door with a
hand held screwdriver.
DO NOT OVER TIGHTEN.
3. INSTALLING THE DEADBOLT LATCH (need phillips head screwdriver)
fig. 3
fig. 4
Summary of Contents for 0711016
Page 1: ...Page 1 0711016 ...