Page 9
Right Handed Door
(vertical)
Left Handed Door
(horizontal)
a. Use care to attach the Control Wire to the interior Wire Connector.
b. Do not force Plug onto Wire Connector.
c. The Plug has two alignment tabs on the smooth side of the Wire Connector.
d. The Plug is inserted with the smooth side facing left into the Wire Connector and pressed into place.
a. The knob goes in the
VERTICAL
position for Right Handed Doors
b. The knob goes in the
HORIZONTAL
position for Left Handed Doors
11. ATTACH THE CONTROL WIRE TO THE INTERIOR ASSEMBLY
10. SET THE INTERIOR KNOB POSITION FOR LEFT OR RIGHT HANDED DOORS
12. Position the Interior Assembly over the tailpiece and push the Interior Assembly against the door
13. Using Screw C (2 ea) and Screw D (1 ea), attach the Interior Assembly to the Mounting
DO NOT OVER TIGHTEN SCREWS
Screws C
Screw D
Screw D
Screw C
fig. 12,13 &14
fig. 11
fig. 10
Mounting screws
NOTE: LOCK AND UNLOCK USING THUMBTURN KNOB TO SEE
IF THE LATCH IS OPENING AND CLOSING EASILY.
Right Handed Door View
Make sure deadbolt
latch is retracted
INTERIOR WIRE
CONNECTOR
PLUG
Summary of Contents for 0711016
Page 1: ...Page 1 0711016 ...