Page 7
INSTALLING INTERIOR ASSEMBLY
11. ATTACH THE CONTROL WIRE TO THE INTERIOR ASSEMBLY
a. Use care to attach the Control Wire male plug to the Interior Assembly female
socket connector.
b. Carefully insert the male plug, smooth side up, into the female socket on the
interior assembly. DO NOT FORCE! (Figure 11a).
12. ATTACH THE INTERIOR ASSEMBLY TO DOOR
a. IMPORTANT: Make sure the knob is in the vertical position for right hand door and
horizontal position for left hand door.
b. Make sure the tailpiece (Figure 12a) is in the vertical position.
c. Position the Interior Assembly over the vertically positioned tailpiece and carefully
push the Interior Assembly against the door (Figure 12a).
d. Using two 5/16” (8mm) screws(A) and one 1” (25mm) screw(D), attach the
Interior Assembly to the Mounting Plate.
DO NOT OVER TIGHTEN SCREWS
Vertical Tailpiece
NOTE: Lock and unlock using Interior Knob to see if the
latch is opening and closing easily.
Figure 12a
Match color
Figure 11a
5/16” (8mm) screws
1” (25mm) screw
A
D
