2
INTRODUCTION
The Tru-Line TR-12 Series Laser Wheel Alignment System consists of the following components:
4- TR-28 Wheel Clamps
1- TR-44 Level Compensator
1- TR-30 Easy Check Gauge
4- Frame Centering Gauges
1- TR-40 Calibration Bar (TR-12 Only)
1- Documentation
1- TR-40/212 Calibration Bar (TR-212 Only) 4- Stock car Style Hub Adapter (Optional)
1- TR-36 Left Laser Gun
1- TR-38 Left Combi Gauge (TR-12 Only)
1- TR-37 Right Laser Gun
1-TR-39 Right Combi Gauge (TR-12 Only)
1- TR-51 Calibration Laser 1- TR-52 Calibration Target Kit (TR-212 Only)
Optional components:
TR-15 Spacer Kit for Clamp
TR-500 Roll Around Cart
Ninety Degree Prism Kit for Setback
TR-502 Travel Case
Hub Adapters for Racecars (must be verified of type by Tru-Line)
Note:
Drawings of each component is included in the procedure sections to follow.
These components are used with an alignment rack or wheel stands with a turntable in the front,
and slip plates in the rear to do an alignment. Racecars may substitute grease plates for turntables
and slip plates. No dedicated rack or level surface is required. Alignment of vehicles can be easily
done almost anywhere and the type of vehicle ranges from passenger cars to RV’s to race cars to
trucks. Many types of alignments can be done, the industry standard: two-wheel centerline, two-
wheel thrust line, and four-wheel.
All of the gauges store on the Calibration Bar, so that a complete calibration of the system can be
easily before use. The components can also be hung on a wall. Since a complete calibration only
takes a second, it is recommending that the system is calibrated before each use and recalibrated
when needed.
Tru-Line is pleased to have you and your company as a client. We are available to answer any
questions that you may have. Please feel free to contact us if there is anything further we can do to
make Tru-Line a better product for you and your company.
Tru-Line
8231 Blaine Road
Blaine, WA 98230
360-371-0552
800-496-3777 Toll Free
www.Tru-Line.net
